Chinese
Latest Products
Contact Us
- Building B, No. 17, Zijing Road, Pingxi, Pingdi Street, Longgang District, Shenzhen
- 934728633@qq.com
- +0755-29698036
BESTNEW-4D-A Injection Molding Machine/Die Casting Machine Cl
BESTNEW-4D-A magnetic wireless clamping force tester is used to measure the micro deformation of the four bearing axes of the injection molding machine and the clamping force of the machine. The instrument simultaneously measures and displays the force or deformation of the four coring columns of the injection molding machine after the mold is locked. The user adjusts the force of the four coring columns in sequence to make them consistent in the end, thereby reducing the impact on the life of the coring columns due to uneven force on the coring columns. At the same time, it solves the problem that the size of the product produced is adsorbed on the coring columns due to uneven force on the mold. It is easy to install and calibrate. It assists the adjustment, installation and calibration of your injection molding machine to prevent the breakage of the coring columns.
Detailed Introduction
Features of wireless clamping force tester:
1. The 8 sensors and the host (handheld display) adopt wireless transceiver mode without wire connection, overcoming the distance limitation. There is no error caused by wire connection.
2. Easy to install and flexible to use. Convenient to carry, use and maintain.
3. The sensor is configured in four colors, which is more convenient to distinguish. It comes with a rechargeable battery, no need to replace, maintenance-free.
4. It uses a color LCD display to display the measurement data in real time. The values of units such as uE, KN, ton, etc. are clear at a glance.
5. The sensor's super-strong magnetic adsorption function can be quickly installed on the column.
6. Accuracy: <0.005F.S.
7. Precision test range: +/-0~750Ue
8. Repeatability: <0.003F.S.
9. Signal output: 0.1%F.S.@100Ue
Wireless clamping force tester product combination:
1. A handheld LCD display
2. Four groups (8) of sensors
3. A portable aluminum outer box
4. An AC220V to DC9V charging cable
5. An instruction manual + certificate
The importance of using a clamping tester:
Clamping force is an important technical parameter of an injection molding machine/die casting machine. The clamping force displayed on the operation panel is usually measured by measuring the oil pressure in the oil cylinder or oil circuit as the clamping force. It cannot reflect the actual clamping force. To obtain the actual clamping force, a clamping force tester is required to measure the actual force on the tie rods. The sum of the forces on the four tie rods is the actual clamping force.
Injection molding machine/die casting machine manufacturers must use clamping force sensors to detect the actual clamping force of each machine and calibrate the clamping force displayed on the operation panel. Third-party inspection agencies also need to use clamping force sensors to inspect the clamping force of injection molding machines/die casting machines. .
3. The clamping force and whether the clamping force is evenly distributed on the four tie rods are important indicators for evaluating the performance of injection molding machines/die casting machines. If the clamping force is evenly distributed on the four tie rods, it means that the design of the clamping force mechanism of the injection molding machine/die casting machine is reasonable; if the actual force deviation of the four tie rods is large, it means that there is a problem with the clamping mechanism, and the cause needs to be further checked and improved. Only when the clamping force is evenly distributed on the tie rod can the product quality be ensured and the service life of the mold and the injection molding machine/die casting machine be extended.
You might also like